Before You Start

Welcome to Square Scrub University

If you haven't already, we highly recommend that you begin by watching our "Before You Start" video. Square Scrub University offers a variety of media to assist you with you project based on the most common floor types. If you cannot find what you are looking for, please feel free to contact us via our contact page with any questions you might have.

EasyTransport                                       Supplies You Will Need

Baseboard Removal 1. Place a piece of scrap wood against the wall to protect the drywall.  2.Place a hammer or pry bar behind baseboard and pull directly out from the wall. 

Handle Assembly
  1. Attach Handle 2. Place Pin in Handle 3. Secure Pin with Clip

Weight Assembly
  1. Add Largest Weight first (note the specific cutuouts that go around machine parts)
2. Add secondary weights 3. Add weight knobs and tighten securely

Pad and Paper/Screen/Plate Placement 1. Place Project Specific Driver Pad onto machine allowing 1/4" overhang toward front of machine for edging. 2. Place Project Specific Paper/Screen/Plate squarely onto the Driver Pad.

 Edging

 1. Use Square Scrub Rental Machine (without Dust Skirt attachment) to edge the perimeter of the project area. 2. Use Palm Sander to Sand any stubborn spots.

Attach Dust Skirt 1. Begin Attaching Dust Skirt on lower back portion of unit towards the center. 2. Continue attaching dust skirt to velcro, matching it at the corners, until it covers the full perimeter of the machine.

Attach Vacuum 1. Attach Square Scrub Rental Unit Hose Segment to the base of the unit.  2. Next, attach the Square Scrub Rental Unit Hose Segment to the vacuum pipe located on the handle of the unit. 3. Using the hose attachment for your vacuum, connect the hose to the remaining portion of the vacuum pipe located on the handle of the unit.

Plugging In 
1. Attach non-lighted portion of plug to plug on base of machine.  2.Plug lighted portion of plug into wall outlet making sure to balance wattage load.