VCT Floors

1. Place Red Driver Pad onto Square Scrub Rental Machine
2. Place SQP Pad onto the Machine squarely over the red driver padUse Square Scrub Rental Machine to Edge perimeter of project areaWork in Straight Lines Vacuum up remaining dust and debrisUse Bucket on a Stick to wet mop the project surfaceLay down finish, working backwards out of project area

Step by Step InstructionsTake your project to the next level following these simple steps:

1. If you have not already, please visit our "Before You Start" Page for useful tips and information about machine assembly, helpful tools and more

2. Place Red Driver pad onto Square Scrub Rental Machine

3. Place SQP Pad onto the Square Scrub Rental Machine squarely over the red driver pad

4. Use Square Scrub Rental Machine to Edge perimeter of project area

5. Working in straight lines, continue to scrub the remaining surface area

6. When Finished with floor wax removal, vacuum up any remaining dust and debris

7. Wet mop the entire surface to remove any final dust and debris

8. Place microfiber pad onto Bucket on a Stick Mop Head

9. Fill Bucket on a Stick with floor refinishing material

10. Using Bucket on a Stick, lay down finish - working backwards out of the project area in order to prevent footprints

11. Let first coat of floor finish dry COMPLETELY

12. Repeat steps 9-10

For more information, watch our
"How To" Video.